Aiwa XM-M25 Stereo System User Manual


 
REPEAT play
One or all the tracks can be played repeatedly.
To repeat the entire disc, turn on “G”.
To repeat the desired track, turn on ‘“% 1”.
Press REPEAT while pressing SHIFT on the remote
control.
Each time they are pressed, the operations can be selected
cyclically.
@G
@c&l
@ Cancel
During “=” play, random play can be performed.
When you start random play during “= 1” play, the repeat
play will be canceled.
To repeat only selected tracks, program the desired tracks (see
below) before choosing “G” function.
To cancel repeat play, press the buttons again.
Up to 30 tracks can be programmed from the inserted disc.
-
REPEAT
1
2
SHIFT
++, Fb
R CLEAR
4
Use the remote control.
1 Press PRGM while pressing SHIFT in stop mode.
“PRGM” flashes on the display.
2 Press numbered buttons O-9 and +1Oto program #~,
a track.
Example:
To select the 12th track, press +1Oand 2.
To select the 20th track, press +1O,+1Oand O.
Total playing time of
Program number the selected tracks
Selected track number
Totai number of
selected tracks
3 Repeat step 2 to program other tracks.
4 Press E to start play.
To check the program
Each time - or - is pressed in stop mode, a track number
and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press REPEAT while pressing
SHIFT on the remote control, “=” lights upon the display.
m
m
During programmed play, the following operations cannot be
performed:
Random play.
- One-track repeat (- 1).
If programmed time is more than 99:59 minutes, or the disc
track number 31 and above is programmed, total playing time
show --:-- in the display.
ENGLISH
10