Filter
Top Products
PRESETTING STATIONS
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station, Use the
preset number to tune in to a preset station directly.
7 Press the TUNER/BAND button to select a band,
and press the
l<< DOWN or F*I UP button to
select a station,
2 Press the II SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
I
1~
Preset number
PRESET NUMBER TUNING
Use the remote control to select the preset number directly,
1
2
Press the l-UNER/BAND button to select a band.
Press the numeric buttons to select a preset
number.
Example:
Toselect preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +1Oand Obuttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the <~ DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected,
To clear a preset station
Select the preset number of the station to be clei~red.Then, press
the
❑ CLEAR button, and press the II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one,
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
ENGLISH ~