Filter
Top Products
BEFORE OPERATION
POWER TAPE MONITOR
I
I
Function indicators
PHONES
I FRbNTSPEAKERA,B I ENTER
ECO
MULTI JOG
To turn the unit on
Press the POWER button.
Operation is possible after four seconds. When the POWER
button is pressed to turn on, the VOL (volume) level or function
name is displayed one after the other.
The selected function indicator lights up in red and the others in
green.
To change the brightness level of the display
1
2
3
Press ECO so that “ECO MODE” is displayed.
Within 4 seconds, turn the MULTI JOG to display DIM MODE,
and then press the ENTER button within 4 seconds.
Wtthin 4 seconds, turn the MULTI JOG to select the dimmer
mode as below.
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
DIM OFF *DIMMER 1- DIMMER 2 _ DIMMER 3
DIM-OFF:
DIMMER1:
DIMMER 2:
DIMMER 3:
The normal display.
The illumination of the display is dimmer than
usual.
The illumination of the display is dimmer than
DIMMER 1.
The illumination of the display is dimmer than
DIMMER 2. The function indicators go out.
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button
to zON.
To use speaker system B: Set the FRONT SPEAKERS B button
to wON.
To use both speaker systems: Set both the buttons to ~ ON.
Set the button(s) to ~OFF to turn off the speaker system(s).
As the front speaker systems A and B are connected in series:
- The sound will be slightly decreased when using both speaker
systems
- No sound can be heard if the FRONT SPEAKERS A and B
buttons are set to w ON when only one speaker system is
connected
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (06.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS
A and B buttons to 10FF. Otherwise sound is output from the
speakers.
The 5.1 CH function, Dolby Pro Logic or DSP system is
automatically canceled when the headphones are plugged in.
To turn the unit off, press the POWER button.
7 ENGLISH