Filter
Top Products
-––– .-–,.,- -– –,--.-.,. .-.,
DSP SURROUND
DSP
MULTIJOG
F
(
~o
@@
DOW”N,UP
DSP
MANUAL
SELECT
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound
Ipresence of real environments. There are four modes with
matching graphic equalization modes. Equalization modes are
selected automatically and can also be selected or turned off to
suit yolur preference.
Press the DSP button, and turn the MULTI JOG until
the desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the
indicators
➤appear on the left sides of the selected DSP name
and matching GE(2 mode name.
Selected DSP mode
Matching GEQ mode
I o cancel me seIecIea moae
Press the DSP button again. “DSP OFF” appears on the displi~y.
Even if canceling the selected DSP mode, the! matclhing or
selected GEQ mode still remains.
To select with
tlhe remote control
Press the DSP button repeatedly until the desired DSP mode is
displayed.
Four DSP modes and “DSP OFF can be selected.
To adjust the volume and balance of the surround
speakers
Press the MANUAL SELECT button on the remot[? control twice
or three times, while the DSP system is turned on, to display “S-
R OdB (for right surround speaker) or “S-L OdB (fc}rleft surround
speaker). Then press the DOWN or UP button repeatedly within
four seconds.
Note that the surround speakers volume and balance of the 5.1
CH and Dolby Pm Logic modes are also changec~.
● The DSP system is autonnatically canceled:
- when the Dolby Pro Logic is turned on
- when the 5.1 CH functicm is selected
● The DSP system cannot be turned on:
- while the 5.1 CH function is selected
- while headphones are plugged in
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE,
HALL or ARENA is selected, no sound will be heard from the
surround speakers.
ENGLWH 10