Filter
Top Products
CONNECTIONS
CONNECTING EQUIPMENT
Jacks and plugs of the connecting cord are color-coded as
follows:
Before connecting the AC cord
Red jacks and plugs: For the right channel of audio signals
The rated voltage of your unit shown on the rear panel is 120 V
White jacks and plugs: For the left channel of audio signals
AC. Check that the rated voltage matches your local voltage.
Yellow jacks and plugs: For video signals.
IMPORTANT
m
Connect the speakers, antennas, and all other external
Insert the plugs fully into the jacks. Loose connections may
equipment first. Then connect the AC cord at the end.
produce a humming sound or other noise interference.
*’ Be sure to connect the VIDEO OUT terminal of a DVD player
-
directly to a TV set, not through this unit. Otherwise, the picture
noise may appear when playing copy protected DVDS.
_
o
0
‘2 Input sound through the 5.1 INPUT terminals cannot be
Q
recorded, When recording the sound from the DVD player,
@
-6: 0– ‘nom 0
000
eimx$ 0
connect the AUDIO OUT (DOWN MIXING) terminals of the
DVD player to the VIDEO l/DVD/MD AUDIO IN terminals of
the unit.
VIDEO 3
*3
When connecting a monaural video, use a stereo-mono
/. .\
//-\ /*~.
connecting cord (not supplied).
Camcordar
(,o,! \g; y;
VIDE) IN L-AUDIOlhJ-R
to VIDEO OUT,
to AUDIO OUT
)
DVD or Video l/MD player*3
m ~:c++
(DK3
~o &
to AUDIO lN(Video l/ME
~to VIDEO lN(Video 1)
<to AUDIOOUT*2
\
to VIDEOOUT(Video 1)’1
to SUB-WOOFER OUT(DVD)
Tv
to VIDEO IN
to AUDIO OUTPUT
LDlcat--*t==Jl
Video 2 or
1
to VIDEO IN (Video 2)
Turntable
J
!-
3 ENGLISH