Filter
Top Products
ABOIJT THE REMOTE CONTROL
POWER ECONOMIZING (ECO) MOIDE
Inserting batteries
Detach the battery cover on the rear of the remote control and
insetl two R6 (size AA) batteries.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
Using the remote control
The instructions in this manual refer mainly to the buttons on the
main unit. Buttons on the remote control with the same names
as thosa on the main unit can be used as well.
The SE-r button functions in the same way as the ENTER button
on the main unit.
● If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
* The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor in the display window is exposed to intense light, such
as direct sunlight.
- Other remote controls are used nearby (those of television,
etc.)
Operating CD Player with this Remote control
You can control basic functions of Aiwa CD players with this
remote control as follows. (For more details, refer to the operating
instructions of the CD player.)
To play, press the ➤/n button.
To stop play, press the ■ button.
To pause play, press the F/n button. To resume play, press
again.
To search, keep the bfWP or W/< button pressed and release
the button.
To skip, press the FM/P or M/< button repeatedly.
To skip discs
Press the DISC SKIP button to skip a disc and press the ➤/11
button to play the next disc.
m14
1
3 2.3
L Powfm dX3TA,NEEiy/ONI indicator
Setting this unit to the ECO mode reduces power consumption
as below.
Initial setting of the ECO mode is ON.
● When the current time is set, the clock display disappears
immediately.
● While the power is off, all the display lights turn off, and only
the POWER &SIANDBY/ON indicator lights in red.
To cancel the ECO mode
1
2
3
Press the ECO button to display ECO MODE while the unit is
turned on.
Within 4 seconds, press ithe ENTER button.
Within 4 seconds, turn the MULTI JOG to select ECO IOFF.
The mode will be automatically set after 4 seconds. It will
also be set if the ENTER button is pressed within 4 seconds
after step 3.
H---SCSK”K”
ENGLISH 6