Aiwa Z-VR55 Stereo System User Manual


 
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1
2
3
Press TUNER/BAND to select a band, and press
MDOWN or MUP to select a station.
Press
II SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequ~ncy
Preset number
Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored.
PRESET “NUMBER TuiiriG”
Use the remote control to select the preset number directly.
1
Press TUNER/BAND to select a band.
2 Press numbered buttons O-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and O.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Press TUNER PRESET
repeatedly untilthe preset numberflashes (preset tuning mode),
and turn MULTI JOG. The preset numbers are selected in
sequence as you turn MULTI JOG.
*PRESET isalso available toselect the preset number. Each
time the buttonispressed, the next highestnumberisselected.
To clear a preset station
Select the preset number of the station to be cleared with the
numbered buttons, Then, press
CLEAR, and press II SET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
fi~ ‘............1
(Deck 1)
(Deck 2)
Usable tapes
Use Type I (normal) tapes only.
1 Press TAPE, then press W= to open the cassette
holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press - to start play.
Only the side facing out from the unit can be played back.
To stop play, press WA.
To pause play, press 11. To resume play, press again.
To fast forward or rewind, press - or - in stop mode.
Then press W4 to stop the tape.
When both Deck 1 and Deck 2 are set in the playback
mode
Deck 2 is heard.
9 ENGLISH