Filter
Top Products
26
ENGLISH
8
Press SHIFT+SP SETUP.
The setting is completed.
NOTE
• When “F-SMALL” is selected, “SW -YES” is automatically set
and cannot be changed.
• “CENTER” and “SURROUND” cannot be set when STEREO
mode is selected. (See “PLA YING WITH SURROUND SOUND”,
page 24)
ADJUSTING THE SPEAKER DISTANCE
Adjusts the speaker distance so that sounds from each speaker
can reach the listening position at the same time.
1
Press SHIFT+SP SETUP.
2
Press i or k to select “SP DIST”.
With each press:
SP SIZE SP DIST BALANCE TEST TONE
3
Press l .
4
Press i or k to select the speaker for setting.
With each press:
FRONT CENTER SURROUND
5
Press l .
6
Press i or k to adjust the distance from each
speaker to the listening position.
Default:
FRONT:
CENTER:
F 17FT (feet)
C 17FT (feet)
SURROUND: S 12FT (feet)
Adjustable range: 1FT to 30FT (for each speaker)
7
Press l.
The adjusted level is set and back to step 4.
8
Press SHIFT+SP SETUP.
The setting is completed.
ADJUSTING THE LEVEL BALANCE OF THE
FRONT SPEAKERS
1
Press SHIFT+SP SETUP.
2
Press i or k to select “BALANCE”.
With each press:
SP SIZE SP DIST BALANCE TEST TONE
3
Press l .
4
Press i or k to adjust the level balnce.
Default:
L 0dB (Left front)
R 0dB (Right front)
Press l to switch the display between “L” and “R”.
5
Press SHIFT+SP SETUP.
The setting is completed.
ADJUSTING THE SPEAKER CHANNEL
LEVEL
Using a test signal, the sound level of all available channels should
be adjusted so that the volume level from each speaker sounds
equal.
1
Press SHIFT+SP SETUP.
2
Press i or k to select “TEST TONE”.
With each press:
SP SIZE SP DIST BALANCE TEST TONE
3
Press l .
The test signal automatically cycles through the channels in
the following order:
LCRRSLS
(L: Left front, C: Center , R: Right front, RS: Right Surround,
LS: Left Surround)
4
While the desired channel is displayed, press i
or k to adjust the channel level.
Adjustable range: –10 to +10(dB)
5
Press SHIFT+SP SETUP.
The setting is completed.
NOTE
• When the volume level is set to 80, any one of speaker channel
level cannot be set to more than +1 dB.
•When the surround mode is set to the STEREO mode (page
24), the speaker channel level cannot be adjusted.