Filter
Top Products
CONNECTIONS
Before connecting the AC cord
The rated votage of your unit shown on the rear panel is 120V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
● Connect the speakers, antennas, and all optional equipment
firSt. Then connect the AC cord in the end.
● Position the front speakers so that the side ducts face away
from the main unit as shown in the illustration in page 1.
● There are no difference between the surround speakers. Both
speakers can be connected as L (left) or R (right).
1 Connect the right and left speakers to the main
unit.
2 Connect the surround speakers to the main unit.
Connect the right surround speaker cord to the SURROUND
SPEAKERS R terminal, and left to the SURROUND
SPEAKERS L terminal.
dll!!P
#
j“:0
.
Q%
Q)
3 Connect the supplied antennas.
Connect the FM antenna to the FM 75 !2 terminals and the
AM antenna to the AM LOOP terminals.
FM antenna
Connect the right speaker cord to the SPEAKERS Rterminals,
and left to the SPEAKERS L terminals.
e
‘d
antenna
#
,5 Q
[
k
pv
@P
,[
The speaker cord with the white stripe should be connected
l--
~
‘> !
to the o terminal and the black cord to the 0 terminal.
4
Connect the AC cord to an AC outlet.
+4
I
o
Right surround speaker
Surround spe~ker cord
3 ENGLISH