Filter
Top Products
8
Chapter 1 - Welcome
GFR-700 Owner’s Manual
Remote Control Overview
The following is an overview of the GFR-700 remote
control buttons and their operations.
Note: The GFR-700 is a programmable remote that
can be “taught” to control virtually any component
in your home theater system. To program the remote
for each input source, see page 42.
1 Main button
Selects the GFR-700 itself, and sets the remote
control to the command set associated with the
main unit (see page 43).
• In Main mode, pressing any button on the re
-
mote control will cause the Main button to
glow indicating that the GFR-700 is active.
2 Source Selector buttons
• Vid 1~4 - Selects the Video 1, Video 2, Vid
-
eo 3, or Video 4 input, including the video,
audio, and configuration settings associated
with that input. Also sets the remote control
to the command set associated with that in-
put (see page 43).
• CD - Selects the CD input, including all con-
figuration settings associated with that in-
put. Also sets the remote control to the CD
command set (see page 44).
• Tuner - Selects the Tuner input, including all
configuration settings associated with that
input. Also sets the remote control to the
Tuner command set (see page 45).
• Rm 2 - Selects the zone 2 outputs, includ-
ing all configuration settings associated with
that output. Also sets the remote control to
the Room 2 command set (see page 45).
3 Power button
Powers the GFR-700 on and off (Standby).
• The rear panel power switch must be on for
this button to function.
4 Input Select buttons
• Ext7.1 - Selects the Ext 7.1 inputs, usually
connected to a DVD, DVD-Audio, or SACD
player.
• Tape - Monitors the Tape output, usually
connected to a recording device (e.g., a VCR
or tape deck).
5 Play button
Programmable button. Can be taught to start
playback of the selected source component.
6 Arrow buttons
Use to navigate the front panel display and on-
screen menus.
7 Pause button
Programmable button. Can be taught to pause
playback of the selected source component.
8 0-9, 10+ buttons
Programmable buttons. Can be taught to make
direct selections (e.g., of DVD chapters or CD
tracks) for the selected source component.
9 FM/AM/HD button
In Tuner mode, switches between the FM and AM
tuner bands.