Model MRC44 Page: 27
© 2002 Xantech Corporation
Figure 17 – DRAG450MRC Basic System Window
(ADVANCED)
With Dragon open, from “FILE” select “NEW PROJECT” and give the project a name. Hit “ENTER” on the
keyboard or click “SAVE”. Click on “USER SETTINGS” in the Menu bar. Select “ADVANCED DRAGON.” Click
on the “BASE UNIT” Pull Down in the Menu bar and select “MRC44”.
The MRC44 “ADVANCED SYSTEM WINDOW” will appear with a "virtual keypad", default source buttons
(SRC1, SRC2 etc.) buttons which allow selection of Zone (1-4), along with tabs, Sense Setup, Controller, Zone
Linking and Icon Editor. In the menu bar, “User Settings” will indicate “(Advanced)”.
NOTE: A project can be changed from Advanced to Expanded and back with only a change in the number of
Zones.
(EXPANDED)
With Dragon open, from “FILE” select “NEW PROJECT” and give the project a name. Hit “ENTER” on the
keyboard or click “SAVE”. Click on “USER SETTINGS” in the Menu bar. Select “ADVANCED DRAGON.” Click
on the “BASE UNIT” Pull Down in the Menu bar and select “MRC44”.
The MRC44 “ADVANCED SYSTEM WINDOW” will appear. Select the Controller tab. In the Expanded Options
box, select ‘EXPANDED’. A message…”Please wait” will appear for about 10 seconds. A "virtual keypad",
default source buttons (SRC1, SRC2 etc.) buttons which allow selection of Zone (1-8), along with tabs Sense
Setup, Controller, Zone Linking and Icon Editor. In the menu bar, “User Settings” will indicate “(Advanced)”.
