Model MRC44 Page: 23
© 2002 Xantech Corporation
PLANNING THE SYSTEM
Before attempting any programming, plan the system configuration first. This should include the following:
1. Determine the brand and type of all source components to be used.
Source 1: _____________
Source 2: _____________
Source 3: _____________
Source 4: _____________
CAUTION: See caution card (included) for the latest information regarding code compatibility before
finalizing the system as there may be some IR code incompatibilities.
2. Determine the components to be used in each zone. Some sources may not be available in all zones.
3. Assemble the components into a working MRC44 system such as that shown in Figure 13. Testing the
system prior to installation can sometimes save time with unexpected problems.
4. Program the MRC44 System using the included DRAG450MRC program.
5. Transfer the System Project to the MRC44 Controller.
6. Confirm all functions in all zones.
PROGRAMMING THE MRC44 SYSTEM USING THE DRAG450MRC SOFTWARE
SOFTWARE SETUP
(BASIC/ADVANCED/EXPANDED)
Computer Requirements (minimum)
x Pentium w/32Mb RAM min.
x Windows 95/98/ME/NT/2000/XP
x 5 MB Hard Drive space (you will need more as your keypad libraries expand)
x 16 MB RAM (32 MB preferred)
x Mouse
Included Hardware & Software Items
The MRC44 Dragon Drop-IR package includes:
x DRAG450MRC CD ROM
x One DB9 Male-to-Female Cable. Connects the MRC44 COM PORT to a DB9 SERIAL PORT 1 on your
computer. If you need to use serial ports 2, 3 or 4 on your computer, see "SERIAL PORT SELECTION"
section. If your computer only has a USB connection, a USB to Serial Adapter (including software) can be
purchased at most computer stores and is available for purchase from Xantech. (Also check with local
Authorized Xantech Distributor).
Connections
Connect the DB9 connector to your PC serial port and to the COM PORT on the rear panel of the MRC44.
Software Installation
Install the DRAG450MRC program onto your hard drive as follows:
1. Insert the disc into your computer’s CD-ROM drive. If your drive has been set for auto run, a Xantech
Welcome Menu will appear. If not, access your CD ROM with Windows Explorer and double click
"setup.exe".
2. On the Welcome menu, click next.
3. Follow the on-screen instructions as the program installs. It takes approximately one to three minutes to
complete, depending on the speed of your machine.
NOTE: For the convenience of the installer, the Dragon Drop-IR™ CD-ROM contains a complete set of
Application Notes, the Xantech Product Catalog, Factory Learned IR Codes, web site browsers and
important notes. Read the Very Important Notes first, click on the desired menu item and follow the on-
screen instructions.
