Replacing
3. Hold the surface unit as level as
possible with the terminal just
started into the receptacle.
2. Line up opening in the reflector
bowl with the surface unit
receptacle.
4. Push the surface unit terminal into
the receptacle. When the terminal
is pushed into the receptacle as
far as it will go, the surface unlt will
fit into the reflector bowl.
CAUTION: Reflector bowb reflect heat back to the utenslb on the
surface untb. They abo help cafch spllb. When they are kept oleon,
they reflect heat better and look new longer.
It a reflector bowl gets dbcdored, some of the utenslb may not be
flat enough, or some may be too large for the surfooe Wt. In either
c~e,someof~heal~sm~togokdooroclwndauknrH
goes down and heats the ntleotor bowl Thb extm heat eon dbodor
It. See “CookIng 6ulde” for further Intormatlon.
