Data exchange between PDA & Machine
42
To initialize a machine:
1. Aim the PDA at the machine’s infrared receiver.
2. Tap on
Initialize, located on the Select a
command
screen on the PDA.
3. The Initialization screen appears. To create a
different ID, use the Graffiti
®
writing area on the
PDA to delete and re-enter a new ID number.
Verify that you are aiming at the machine’s
infrared receiver then tap on OK when the ID is
correct.
Important:
Machine IDs must begin with a “W” for washers or a
“D” for dryers, followed by an additional five digits.
The Handheld Software suggests a logical numbering
order. Or, if you prefer, you could use the product
serial number as well as another system of your
choice. Machine IDs must also be unique within a
location.
