24
ROTISSERIE
ASSEMBLY
You will need: Rotisserie Motor Bracket(1), Rotisserie
Motor(1), Rotisserie Shaft(1) and Spit forks(2)
1. Install the motor bracket
Attach the motor bracket onto the left side of the cook
box by mounting the bracket key holes over the
welded bolts on the cooking box.
4. Insert the Rotisserie Shaft in the Motor
Insert the pointed end of the rotisserie shaft into the
motor.
6. Set the Rotisserie Shaft onto rotisserie support
block.
Place the handle end of rotisserie onto the support
rollers.
Push the bracket down to lock into position.
2. Attach the motor
Slide the motor onto the motor bracket.
3. Put the Spit Forks on the Rotisserie Shaft
Slide a spit fork from each side onto the shaft so that
the tines are facing each other.Reverse forks to each
other so that one fork screw is on top and one is on
the bottom.as shown in illustration Screw in the split
fork screws to hold the forks in place.
