A SERVICE OF

logo

17
11. Install
Ribbon
Cable on
TR1 Control
Board
Be sure not to twist or crimp ribbon
cables.
Insert cables into corresponding sockets
and fasten in accordance with directions
in step 5.
NEMA 1
Insert cradle clips into holes in cassette.
Push down on cradle to snap it into
place.
12. Install
LCP Cradle
10. Secure
LonWorks
Card
Secure LonWorks card with 3
self-tapping screws and washers
provided using Torx T-10 screw driver.
Tighten to 8 in-lbs.