Dialling From the Contacts List
1. From standby mode, press Contacts (right softkey).
2. Select the entry you want to call and press .
3. Highlight the number you wish to call and press or .
Note: The icon next to each entry represents the labels (for example,
Mobile, Home, Work, etc.) of the entry’s default phone number. A triangle
next to the icon means there are other phone numbers for the entry.
Press the navigation key right or left to select other number.
Using Speed Dialling
With this feature, you can dial speed dial entries using one key
press for locations 2-9. (See “Assigning Speed Dial Numbers” on
page 62.)
ᮣ
From standby mode, press and hold the appropriate key for
approximately two seconds.
The display showing “Connecting...” confirms that the number
has been dialled.
Using Contacts Match
The Contacts Match feature allows you to retrieve any number
saved in your Contacts by entering only the last three to six
digits of the number. You need to activate this feature first to use
it. (See “Setting Contacts Match” on page 47.)
To place a call using the Contacts Match feature:
1. Enter the last three to six digits of a Contacts entry’s phone
number.
2. Press or . If there is more than one matched number
in your Contacts, the Contacts Match list is displayed.
3. Select the name you want to call from the list, and then press
or to place a call.
24 2.The Basics
