107
Troubleshooting
Refer also to “Adjusting the image during recording” (p. 109).
Pressing START/STOP does not record movies on the disc.
• The playback screen is displayed. Set your camcorder to recording standby (p. 38).
• Your camcorder is recording the scene you have just shot on the disc.
• The disc has run out of space. Use a new disc or format the disc (DVD-RW/DVD+RW only,
p. 72). Or delete the unnecessary images (p. 54).
• When you are using one of the following discs after finalizing it, make the disc to be able to
record additional scenes (p.74). Or use a new disc.
–DVD+RW
–DVD-RW recorded with HD (high definition) image quality
–DVD-RW (VR mode) recorded with SD (standard definition) image quality
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for
about 1 hour in a cool place (p. 132).
You cannot record a still image.
• The playback screen is displayed. Set your camcorder to recording standby (p. 38).
• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 128).
• The “Memory Stick Duo” has run out of space. Use a new “Memory Stick Duo” or format the
“Memory Stick Duo” (p. 73). Or delete the unnecessary images (p. 55).
• You cannot record a still image together with:
– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]
• You cannot record a still image on a disc on your camcorder.
The ACCESS lamp lights up even when you stop recording.
• Your camcorder is recording the scene you have just shot on the disc.
The recording angle differs depending on the POWER switch setting position.
• The recording angle for the still image is wider than the one for the movie.
The shutter sound is not heard when you record a still image.
• Set [BEEP] to [ON] (p. 85).
• The shutter does not sound when using the Dual Rec function.
The flash does not work.
• You cannot record with the flash with:
Recording
Continued ,
