ConguringSoundSettings
Sound settings can be configured according to your personal
preferences.
Press “MENU” button and select the rst icon by using “ ” or “ ”
button. Press OK button to view Sound Settings menu.
Operating Sound Settings Menu Items
Press “• ” or “ ” button to highlight a menu item.
Use “• ” or “ ” button to set an item.
Press • “MENU” button to exit.
Sound Settings Menu Items
Volume: Adjusts volume level.
Equalizer: Press OK button to view equalizer sub-menu.
In equalizer menu, the preset can be changed to Music, Movie,
Speech, Flat, Classic and User. Press the “MENU” button to return
to the previous menu.
Note: Equalizer menu settings can be changed manually only when
the Equalizer Mode is in User.
Balance: This setting is used for emphasizing left or right speaker
balance.
Headphone: Sets headphone volume.
AVL: Automatic Volume Limiting (AVL) function sets the sound to obtain
xed output level between programmes (For instance, volume level of
advertisements tend to be louder than programmes).
Dynamic Bass: Dynamic Bass is used to increase bass effect of the
TV set.
Digital Out: Sets digital out audio type.
ConguringYourTV’sSettings
Detailed settings can be configured to suit your personal
preferences.
Press “MENU” button and select Settings ikon by using “ ” or “ ”
button. Press OK button to view Settings menu.
Operating Settings Menu Items
Press “• ” or “ ” button to highlight a menu item.
Press • OK button to select an item.
Press • “MENU” button to exit.
Settings Menu Items
Conditional Access: Controls conditional access modules when
available.
Language: Congures language settings.
Parental: Congures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Sources: Enables or disables selected source options.
Other Settings: Displays other setting options of the TV set.
Using a Conditional Access Module
IMPORTANT: Insert or remove the CI module only when the TV is
SWITCHED OFF.
In order to watch certain digital channels, a conditional access module •
(CAM) can be necessary. This module must be inserted in the CI slot
of your TV.
Obtain the Conditional Access Module (CAM) and the viewing card •
by subscribing to a pay channel company, then insert those to the
TV using the following procedure.
Insert the CAM and then the viewing card to the slot that is located •
in the terminal cover at the rear side of the TV.
The CAM should be correctly inserted, it is impossible to insert fully if •
reversed. The CAM or the TV terminal may be damaged if the CAM
is forcefully inserted.
Connect the TV to the mains supply, switch on and then wait for few
moments until the card is activated.
When no module is inserted, “• No Common Interface module
detected” message appears on the screen.
Refer to the module instruction manual for details of the settings.•
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on the service
provider.
Press “MENU” button and select the icon by using “ ” or “ ” button.
Press OK button to view Settings menu. Use “ ” or “ ” button to
highlight Conditional Access and press OK to view menu items.
