To cancel an already set reminder, highlight that programme and press
the OK button. Then select “Delete Timer” option. The timer will be
cancelled.
Note: It is not possible to record or set timer for two or more individual
events at the same time interval.
First Time Installation
IMPORTANT: Ensure that the aerial is connected before switching
on the TV for the rst time installation.
When the TV is operated for the rst time, installation wizard will •
guide you through the process. First, language selection screen will
be displayed:
Use “• ” or “ ” buttons to select your language and press OK button
to set selected language and continue.
After selecting the language, “• Welcome!” screen will be displayed,
requiring you to set Country,Teletext Language and Scan
Encrypted options.
By pressing “• ” or “ ” button, select the country you want to set and
press “ ” button to highlight Teletext Language option. Use “ ” or
“ ” button to select desired Teletext Language.
Press “• ” button after setting Teletext Language option. Scan
Encrypted will be then highlighted. You can set Scan Encrypted as
Yes if you want to scan coded stations.Afterwards select the desired
Teletext Language.
Press • OK button on the remote control to continue and the following
message will be displayed on the screen:
To select the “Yes” or “No” option, highlight the item by using “ ” or “
” buttons and press OK button.
Afterwards, the following OSD will be displayed on the screen and the
digital television will search for digital terrestrial TV broadcasts.
Note: You can press “MENU” button to cancel.
IMPORTANT!
If you are located at a TV regional border or are able to receive
broadcasts from more than one transmitter the “Choose Region” OSD
will be displayed after the digital channels have been scanned.
To prevent poor quality pictures or unwanted regional variation from
being stored in your main channel list you MUST! select your preferred
regional options for each level where available, move the cursor to
each option and press the Left/right arrow keys to view the available
regions/transmitters.
The example below shows “UK” “England” “North West” have been
selected as the regional options, after OK is pressed they can only
be changed if “First time installation” is repeated. Received regional
variations from the non selected region/transmitters will be stored
from preset 800.
After all the available stations have been stored a channel list will be
shown based on the broadcaster LCN press OK to accept this channel
order and start viewing or use the Edit functions to change the order
or delete unwanted channels.
Press • OK button to quit channel list and watch TV.
