2C. Settings 65
Settings
Adjusting the Volume Settings
Adjust the volume settings to suit your needs and your
environment.
1. Press > and tap > Sound >
Sound.
2. Touch and drag the onscreen slider to assign the
volume settings for any of the following volume
levels and tap
OK.
Ⅲ Ringtone, Media, Alarm, or Notification volume.
3. Tap OK to assign the volume levels.
Vibrate
To set your device to vibrate for incoming calls and silent
for notifications:
ᮣ Press the volume button down in standby mode
until you see on the screen.
To set your device to always vibrate for incoming calls:
1. Press > and tap > Sound >
Vibrate.
2. Tap a feature to enable or disable it. A checkmark
indicates the feature is enabled:
Ⅲ Always: your device vibrates for all incoming calls
and notifications.
Ⅲ Never: your device uses sound only for all
notifications and alerts.
Ⅲ Only in silent mode: your device vibrates for
notifications and alerts when Silent mode is
active.
Ⅲ Only when not in Silent mode: your device only
vibrates for notifications and alerts when Silent
mode is not active.
To set your device to vibrate while using the dialpad:
1. Press > and tap > Sound.
2. Tap Haptic feedback. (If you have already checked
the option, tapping it again deselects the option.)
Note: By default, the Use incoming call volume for
notifications field is active, in this case, the Notification
slider is not accessible until it is disabled.
SPH-M930_Boost.book Page 65 Monday, August 15, 2011 12:02 PM
