The iDCS 500 may be configured as a key system or a hybrid system. Depending on the
method of operation, the appropriate FCC number must be given to the telephone com-
pany. Certain features such as pooled access by button or dial access, LCR, off premise
extensions and tie lines may require the hybrid registration. Check with the local tele-
phone company providing the service if you are in doubt. It is the customer’s responsibil-
ity to comply with local telephone company tariffs.
TELEPHONE CONNECTION REQUIREMENTS
The Federal Communications Commission (FCC) has established rules which permit the
DCS to be connected directly to the telephone network using telephone company net-
work access jacks usually referred to as “Registered Jacks.”
5.3 TELEPHONE COMPANY INTERFACES
CIRCUIT TYPE DCS FACILITY NETWORK JACK
CARD TYPE INTERFACE CODE
LOOP START LINE TRK-B O2LS2 RJ21X
TRK-B1 RJ11C
TRK-C1 RJ14C
T1 04DU9-DN RJ48C
GROUND START T1 04DU9-BN RJ48C
LINE GTRK 02GS2 RJ21X
RJ11C
RJ14C
DID LINE T1 04DU9-BN RJ48C
DID 02RV2-T RJ21X
RJ11C
RJ14C
E & M TIE LINE T1 04DU9-BN RJ48C
E & M TL11M RJ2EX
OFF PREMISES SLI-4 circuit OL13C RJ21X
EXTENSION board only RJ11C
RJ14C
E911 E911 02RV2-O
5.2
