Pelco Manual C1402M-B (2/98) 29
6.0 SPECIFICATIONS
MECHANICAL
Construction
Pan/tilt: Aluminum
Back box: Aluminum
Lower dome: Acrylic hemisphere with distortion free viewing window; rotates
with the pan/tilt/camera/lens.
Max. Camera/Lens
Length: (Including BNC connector):
12.5"H x 4.5"W x 3.25"H (31.75 cm x 11.43 cm x 8.25 cm)
Pan: 0-355° movement in horizontal plane
(Models SB2600, SB2600-PP)
360° continuous rotation (Models SB2600-SL, SB2600SL-PP)
Pan Speed: 24°/sec ±1° (no load condition)
Tilt: -90° movement from horizontal plane
Tilt Speed: 12°/sec ±.5° (no load condition)
Maximum Load: 10 lbs (4.6 kg)
Gearing: Spur gear, direct drive (pan and tilt)
Bearings
Pan: Heavy duty ball bearing and Oilite bronze bushing
Tilt: Oilite bronze bushing
Duty Cycle: 50% duty cycle; 30 minute rating
Braking: Friction
ELECTRICAL
Input Voltage: 24 VAC required for pan/tilt
Power Requirements
Pan: .30 amp
Tilt: .38 amp
Connectors
Pan/Tilt: Amp CPC type (mate supplied) installed onto a pigtail exiting
from the rear of the back box. All functions (camera power, lens,
pan/tilt and video).
Lens: Hirschmann MAB6100 (mate supplied) for non-PP models
AMP CPC type (mate supplied) for PP models
Video: BNC
Camera Power: Spade lugs, 24 VAC
Motors: Two-phase induction type, continuous duty, instantaneous
reversing
Limit Switches
Pan: 5 amp, on non-SL
Tilt: 5 amp
Conductor
Requirements: As listed, plus coax cable Non-PP models Pan/tilt (5 plus
ground), Lens (4), Camera AC (2) PP models Pan/tilt (9 plus
ground), Lens (4), Camera AC (2)
