Chapter 8
Kodak ESP 9 Printer User Guide 71
Send Fax Options
The available fax settings are shown below:
Fax reports
The following reports are available from the Fax Settings menu:
The printer also generates a Fax Lost Job report, which contains details about the time, date,
and fax number. This option is NOT available as an option in the Fax Settings menu. Rather, if a fax
was not received because your printer lost power (for instance, due to an electrical power outage),
the printer automatically generates a Fax Lost Job report when power returns to the printer (and it
is turned on). This feature allows you to notify the sender(s) about any fax that could not be
received due to loss of power, and you can request re–transmission, as appropriate.
Menu Options
View Settings /
Select
Settings
Edit Phonebook
OK
Add New Entry
Edit Entry
Delete Entry
Resolution
or
Standard
Fine
Photo
Color
or
Color
Black & White
Brightness
or
-3 to +3
Save As Defaults OK
Fax report name Contains: To print:
Print Fax
Confirmation Page
Details about faxes, one fax at a time,
based on the menu setting.
Set the value for this option to
Never,
Always, or After Failure Only in the Fax
Settings menu on the LCD display.
Note: This report cannot be run from
the control panel; it is generated
automatically only after sending a fax,
and only based on the setting.
Fax Settings Information about the printer and a
summary of the current fax settings for
the device. See “Fax Settings Options ”
on page 37.
Press
OK to select, then press Start.
Fax Activity Log Details about the last 30 faxes sent and
received.
Press
OK to select, then press Start.
