Q1860-90918 6 Removing and replacing parts 109
Checking memory installation
Follow this procedure to verify that the DIMMs are installed correctly:
1 Check that the printer control panel shows the
READY message when the printer is turned on.
If an error message appears, a DIMM might have been incorrectly installed. Check the
printer messages.
2 Print a new configuration page.
3 Check the memory section on the configuration page and compare it to the configuration
page that you printed before the DIMM installation. If the amount of memory has not
increased, the DIMM might not be installed correctly. Repeat the installation procedure to
verify that the DIMM has been installed correctly. If the amount of memory has not increased
after this reinstallation attempt, install a new DIMM to discover whether the first DIMM is
defective.
Note If you installed a printer language (personality), check the Installed Personalities and Options
section on the configuration page. This section should include the new printer language.
www.GovTechMedia.com
