44 GPSMAP 3006C/3010C Owner’s Manual
MaIn Pages > vIdeo Page
MaIn
paGes
Video Page
The Video Page is available only if you attach an optional NTSC (National
Television System Committee) or PAL (Phase Alternate Line) composite video
source to the GPSMAP 3006C/3010C (see the GPSMAP 3006C/3010C & GPS 17
Installation Instructions for more information). You can input up to two different
video signals to your GPSMAP 3006C/3010C. When attached, you can change or
alternate between video sources, and adjust the aspect, brightness, saturation, and
contrast. You can also adjust which video standard is being input.
Video Page Options
Use the ADJ key and soft keys to access the following options: Source, Aspect,
Brightness, Saturation, Contrast, and Standard.
•
Source—select input between Video In 1 and Video In 2. Choose
Alternate to switch between sources at 5, 10, and 30 second intervals.
•
Aspect—select Stretch to stretch the video input to ll the entire frame, or
select Standard to show the normal view of the video input.
•
Brightness—affects how bright the overall video input appears on the
display (0%–100%).
•
Saturation—adjusts the intensity of the colors. High saturation produces
bright colors, whereas low saturation produces washed out colors.
•
Contrast—adjusts the difference between light and dark areas of the video
input. The higher the contrast, the brighter the video appears.
•
Standard (ADJ key only)—selects the composite video input standard.
Choose Auto to have the unit automatically select the Standard. Choose
NTSC for composite video in NTSC standard or PAL for composite video
input in PAL standard. If set to Auto and Alternate is selected as the
Source, you might notice a switching display as the unit determines the
video input. For best results, set to the specic Standard.
