Maintenance Footnotes
(a) A fluid loss in any vehicle system could
indicate a problem. Have the system inspected
and repaired and the fluid level checked. Add fluid
if needed.
(b) Visually inspect wiper blades for wear or
cracking. Replace wiper blades that appear worn
or damaged or that streak or miss areas of
the windshield.
(c) Make sure the safety belt reminder light and all
your belts, buckles, latch plates, retractors, and
anchorages are working properly. Look for
any other loose or damaged safety belt system
parts. If you see anything that might keep a safety
belt system from doing its job, have it repaired.
Have any torn or frayed safety belts replaced. Also
look for any opened or broken airbag coverings,
and have them repaired or replaced. The
airbag system does not need regular maintenance.
(d) Lubricate the trunk key lock cylinder. Lubricate
all body door hinges. Lubricate all hinges and
latches, including those for the hood, trunk,
console door, and any folding seat hardware. More
frequent lubrication may be required when
exposed to a corrosive environment. Applying
silicone grease on weatherstrips with a clean cloth
will make them last longer, seal better, and not
stick or squeak.
(e) If you drive regularly under dusty conditions,
the filter may require replacement more often.
(f) Change automatic transmission fluid and filter if
the vehicle is mainly driven under one or more
of these conditions:
− In heavy city traffic where the outside
temperature regularly reaches 90°F (32°C) or
higher.
− In hilly or mountainous terrain.
− Uses such as high performance operation.
(g) Drain, flush, and refill cooling system.
This service can be complex; you should have
your dealer perform this service. See Engine
Coolant on page 385 for what to use. Inspect
hoses. Clean radiator, condenser, pressure cap,
and filler neck. Pressure test the cooling
system and pressure cap.
469
