Windshield Wipers
Use the lever located on the right side of the
steering column to operate the windshield wipers.
1 (High Speed): Move the lever to this
position for steady wiping at high speed.
6 (Low Speed): Move the lever to this
position for steady wiping at low speed.
&(Delay): Move the lever to this position to set
a delay between wipes.
x(Delay Adjustment): Move the lever to this
position to choose a delayed wiping cycle. Turn the
intermittent adjust band down for a longer delay
or up for a shorter delay. The wiper speed can only
be manually adjusted when the lever is in this
position.
9(Off): Move the lever to this position to turn off
the windshield wipers.
8(Mist): Move the lever all the way down to
mist and release for a single wiping cycle.
The windshield wipers will stop after one wipe. If
you want more wipes, hold the band on mist
longer.
Heavy snow or ice can overload the wipers. If this
occurs, a circuit breaker will stop the wipers
until the motor cools. So, be sure to clear any ice
and snow from the windshield wiper blades
before using them. If the wiper blades are frozen
to the windshield, carefully loosen them or
warm the windshield before turning the wipers on.
If your blades do become worn or damaged,
get new blades or blade inserts.
144
