OPERATION
15
Recording Setup
Basic Recording Setups
11
Press CD or TUNER/BAND to select source.
22
Open the cassette deck TAPE B and insert a
blank cassette into the cassette compartment.
Set the recording direction
Press PLAY MODE repeatedly to set the recording
direction.
Recording from Radio, CD or Auxiliary
source
11
Press RECORD/ RECORD PAUSE ( REC or
) button .
“ REC” flashes and holds the cassette in pause
mode.
22
Press PLAY( ) on the front panel.
The recording begins.
To Pause Recording
To pause the recording, press RECORD/ RECORD
PAUSE ( REC or ) button again.
“ REC” flashes in display window.
To Stop Recording
Press TAPE STOP ( ).
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD
and programmed titles automatically onto a cassette.
11
In Stop mode, press CD SYNC..
“ REC” flashes and “ ” appears in the
display window.
22
The synchronized recording is started auto-
matically after about 7 seconds.
otes
•
If you wish to record from the desired track, select
the desired track with / before
commencing CD synchro recording.
•
A function change is not possible during
recording.
Wind the tape to the recording start point.
Only use normal tapes to make recordings.
You can only use deck B for recording.
