Filter
Top Products
11
BEFORE OPERATION
Audio Adjustment
Volume Adjustment
• On unit, turn VOLUME DOWN/UP knob clockwise to
increase the sound level, or counterclockwise to
decrease it.
• On remote, use VOLUME CONTROL ( ) to increase
the sound level, or use the VOLUME CONTROL ( )
to decrease sound.
Sound Quality Adjustment
•To activate stereo sound
-You can choose between 8 fixed sound impressions
and 1 USER MODE.
Select a desired sound mode using the EQ PATT.
button ( or turning EQ knob on the front panel).
- When you select USER MODE, press the ENTER
button repeatedly.
You can select three sound modes (BASS,
MIDDLE, TREBLE).
- Each time you press the button the indicator in the
display window changes as follows.
FLAT → ROCK → POP → VOCAL → CLASSIC
↑
USER MODE ← SAMBA ← SALSA ← JAZZ
•Headphone Jack
Connect a stereo headphone plug ( 6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
MUTE
Press MUTE to turn off the sound, press again to
restore.
You can mute your unit in order, for example, to answer
a telephone, “MUTE” indicator flashes in the display
window.
SURROUND
To activate surround mode
•You can choose between 6 fixed sound impressions.
• Select a desired surround mode using the
SURROUND button.
• Each time you press SURROUND, the indicator
changes as follows.
SURROUND OFF →SIMULATED LOW →SIMULATED HIGH
↑
MOVIE HIGH ← MOVIE LOW ← MUSIC HIGH ←MUSIC LOW
DISPLAY MODE
Whenever you press DISPLAY MODE, you can enjoy
the spectrum change with 6 types in the display.
XDSS (Extreme Dynamic Sound System)
- Use the XDSS feature to reinforce treble, bass and
surround effect.
- Each time you press XDSS the indicator changes as
follows.
XDSS OFF → XDSS1 ON → XDSS2 ON
DEMO
Press DEMO with the power off to review the available
functions in the display window.
To cancel DEMO, press POWER or DEMO again.
During demonstration with the power on, you can cancel
DEMO by pressing any other button.
DIMMER
Dimmer darkens the display window by half with the
power on. Press DIMMER once, and the display dark-
ens. If you press Dimmer a second time, the display will
darken by half again. To cancel, press Dimmer a third
time.
11
Connect an auxiliary device i.e. TV or VCR, via the rear mounted AUX input jacks.
22
Press AUX.
Auxiliary (External Equipment) Input
ote
You can also record from the auxiliary input source,
see Recording Section.