Filter
Top Products
SOUND FIELD PARAMETER DESCRIPTIONS
75
English
ADDITIONAL
INFORMATION
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your
listening room. Not all of the following parameters are found in every program.
■ DSP LEVEL
Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.
Description: Depending on the acoustics of your listening room, you may want to increase or decrease the DSP
effect level relative to the level of the direct sound.
Control range: –6 dB – +3 dB
■ INIT. DLY (Initial delay)
Function: This parameter changes the apparent distance from the source sound by adjusting the delay between the
direct sound and the first reflection heard by the listener.
Description: The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther
it seems. For a small room, set to a small value. For a large room, set to a large value.
Control range: 1
– 99 msec
■ ROOM SIZE/P. ROOM SIZE (Room size)
Function: This parameter adjusts the apparent size of the surround sound field. The larger the value, the larger the
surround sound field becomes.
Description: As the sound is repeatedly reflected around a room, the larger the hall is, the longer the time between
the original reflected sound and the subsequent reflections. By controlling the time between the
reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter from
one to two, doubles the apparent length of the room.
Control range: 0.1 – 2.0
SOUND FIELD PARAMETER DESCRIPTIONS
Source Sound
Early
Reflections
Time
Time
Time
INIT. DLY
INIT. DLY
INIT. DLY
Sound Source
Reflection Face
Level
Small value = 1 ms Large value = 99 ms
Level
Level
Level
Level
Level
Time
Time
Time
Source Sound
Early
Reflections
Small value = 0.1
Large value = 2.0
Sound Source
00_RXV750_U_EN.book Page 75 Tuesday, February 17, 2004 10:08 AM