Filter
Top Products
71
English
ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
ADVANCED
OPERATION
Using this unit’s internal amplifier
To use this unit’s internal amplifier, set “ZONE2 AMP” to ON in SET MENU (see page 61).
The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
■ To enable Zone 2 mode on the remote
control
You will be able to switch the remote control mode from
one room to another, and use STANDBY, SYSTEM
POWER, MUTE and VOL –/+ to control the selected
room.
1 Repeat steps 1 and 2 of the procedure in
“Setting manufacturer codes” on page 63.
2 Press j / i to select “L:AMP”.
3 Press u / d to select “ZONE”.
4 Press LEARN to complete the Zone setup.
The remote control will be able to operate this unit
and Zone 2.
■ To control Zone 2
1 Press SELECT k repeatedly to display
“ZONE2” in the display window.
2 Press SYSTEM POWER to turn Zone 2 power
on.
R
L
+
–
PRESENCE
/ZONE 2
Second room
This unit
Remote controlling Zone 2
TV VOL
PRESET PRESET
TV MUTE
TV VOL
SELECT
CHCH
+
+
–
–
TV VOL
PRESET PRESET
TV MUTE
TV VOL
SELECT
CHCH
+
+
–
–
LEARN
SELECT
00_RXV750_U_EN.book Page 71 Tuesday, February 17, 2004 10:08 AM