Filter
Top Products
51
English
ADVANCED OPERATIONS
ADVANCED
OPERATION
You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in “AUTO SETUP” (page 26),
“SPEAKER LEVEL” (page 56) and “Manually adjusting
speaker levels” (page 50). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
You cannot activate the test tone if headphones are connected to
the
PHONES jack. Remove the headphones from the PHONES
jack.
1 Press AMP.
2 Press TEST.
The unit outputs a test tone.
3 Press u / d repeatedly to select the speaker
you want to adjust.
TEST LEFT Front left speaker
TEST CENTER Center speaker
TEST RIGHT Front right speaker
TEST SUR.R Right surround speaker
TEST SUR.B.R Right surround back speaker
TEST SUR.B.L Left surround back speaker
TEST SUR.L Left surround speaker
TEST SUBWOOFER Subwoofer
4 Press j / i to adjust the speaker volumes.
5 Press TEST when you have completed your
adjustment.
The test tone stops.
If PRESENCE SP in “SPEAKER SET” is set to YES,
you can adjust the presence speaker volumes
(proceed to step 6).
■ Outputting the test tone from the
PRESENCE speakers
6 Press u / d repeatedly to select the speaker
from which you want to output the test tone.
TEST FRONT Front speakers
TEST PRESENCE Presence speakers
TEST PRES L Left presence speakers
TEST PRES R Right presence speakers
7 Press j / i to adjust the presence speaker
volumes.
8 Press TEST when you have completed your
adjustment.
The test tone stops.
Using the test tone
Note
AMP
POWERPOWER
REC
AUDIO
MUTE
MENUTITLE
CH CH
VOL
DISC SKIP
FREQ/RDS EON
START
SET MENU
LEVEL
A/B/C/D/E
TV INPUT
MODE
PTY SEEK
TV VOL
PRESET
TEST
ON SCREEN
STRAIGHT
EFFECT
DISPLAYRETURN
PRESET
TV MUTE
SELECT
TV VOL
AVTV
1
3,6
2,5,8
4,7
00_RXV750_U_EN.book Page 51 Tuesday, February 17, 2004 10:08 AM