Filter
Top Products
72
ZONE 2 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
3 Press an input selector button to select the
input source you want to listen to in the
second room.
The display window shows “2: name of selected
input” if the remote control is in the Zone 2 mode.
4 You can control Zone 2 using the input
selector, STANDBY, SYSTEM POWER, MUTE
and VOL –/+ buttons.
* If “ZONE2 AMP” in OPTION MENU is set to ON, you
can use VOL –/+ to adjust sound output from speakers
connected to the PRESENCE/ZONE 2 speaker terminals
(see page 61). However, VOL –/+ cannot be used to
adjust sound output from the ZONE2 OUTPUT jacks.
5 Press SELECT k/n to exit from the Zone 2
mode.
• “ZONE2” will appear in the display window only when k is
pressed, and SYSTM only when n is pressed.
• If you press SELECT k when the unit is set to Zone 2 mode, the
unit switches to Zone 3 mode. However, this unit does not
support Zone 3 mode. To exit Zone 3 mode, press SELECT n.
■ Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone2 mode is selected, you can turn
the main unit, Zone 2 to on/standby individually.
• When system mode is selected, or when YPC is
selected as the amplifier library (L:AMP) code, you
can turn the main unit, Zone 2 to on/standby all
together simultaneously.
*
“MAIN” appears for a few seconds when SYSTEM POWER
or STANDBY is pressed.
■ Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second room you will only hear
digital noise (that may damage your speakers). Thus, the
following considerations and adjustments need to be made
when playing DTS-encoded discs.
For DVDs encoded in DTS
Only 2 channel analog audio signals may be sent to the
second room.
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or Dolby
Digital soundtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2
feature with CDs encoded in DTS.
Notes
AB
PHONO
CDMD/CD-RTUNERV- AUX
DVDVCR 1DTV/CBL DVR/VCR2
MULTI CH IN
*
TRANSMIT
RE-NAME
INPUT MODE
STANDBY
SYSTEM
POWER
AB
PHONO
CDMD/CD-RTUNERV-AU X
DVDVCR 1DTV/CBL DVR/VCR2
MULTI CH IN
SLEEP
CLEAR LEARN
REC
AUDIO
MUTE
MENUTITLE
CH CH
VOL
DISC SKIP
FREQ/RDS EON
START
SET MENU
LEVEL
A/B/C/D/E
TV INPUT
MODE
PTY SEEK
TV VOL
PRESET
TEST
ON SCREEN
STRAIGHT
EFFECT
DISPLAYRETURN
PRESET
TV MUTE
SELECT
TV VOL
LCD display SYSTEM POWER/
STANDBY
Normal mode* Name of component Turns the main unit
on/standby
Zone 2 mode “ZONE2” or “2:name
of component”
Turns Zone 2 to on/
standby
System mode “SYSTM” Turns everything (the
main unit and Zone
2) on/standby
00_RXV750_U_EN.book Page 72 Tuesday, February 17, 2004 10:08 AM