Filter
Top Products
46
SET MENU
10 DISPLAY SET
OSD SHIFT………………0
DIMMER………………………0
≥ BLUE BACK………AUTO
9 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 26 for details about the input
mode).
Choices: AUTO, LAST
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for the respective source.
10 DISPLAY SET
■ BLUE BACK
Select AUTO to display a blue background in the on-
screen display when there’s no video signal input.
Nothing is displayed on the screen, including the on-
screen display, if OFF is selected.
Choices: AUTO, OFF
■ OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
1 Press i to lower the position.
Press j to raise the position.
■ DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
8 I/O ASSIGN (input/output
assignment)
It is possible to assign jacks according to the component
to be used if this unit’s COMPONENT VIDEO input jack
or DIGITAL INPUT/OUTPUT jack settings (component
names for jacks) differ from that component. This makes
it possible to change the jack assignment and effectively
connect more components.
Once you assign, you can select that component with
INPUT l / h (or the input selector buttons on the
remote control).
■ 8A CMPNT-V INPUT for
COMPONENT VIDEO INPUT jacks
[A] and [B]
Choices: [A] DVD, V-AUX, VCR 2/DVR, VCR 1,
D-TV/CBL
[B] DVD, V-AUX, VCR 2/DVR, VCR 1,
D-TV/CBL
■ 8B OPTICAL OUT for OPTICAL
OUTPUT jack (1)
Choices: (1) MD/CD-R, CD, PHONO, V-AUX,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
■ 8C OPTICAL IN for OPTICAL
INPUT jacks (2) to (4)
Choices: (2) MD/CD-R, CD, PHONO,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
(3) MD/CD-R, CD, PHONO,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
(4) MD/CD-R, CD, PHONO,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
■ 8D COAXIAL IN for COAXIAL
INPUT jack (5)
Choices: (5) MD/CD-R, CD, PHONO, V-AUX,
VCR 2/DVR, VCR 1, D-TV/CBL,
DVD
Notes
• You cannot select an item more than once for the same type of
jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
0108V730_41-47_EN(U) 12/27/01, 2:18 PM46