Filter
Top Products
46
■ AMP/TUN Note: TV POWER and TV VOLUME function if you have preset the code for your TV.
1 POWER
This button turns this unit on.
2 INPUT
Press these buttons to select the program source.
3 EXT. DEC.
Press this button when using a external decoder.
4 A/B/C/D/E
Press this button to select a group of preset stations.
5 DSP selector
Press this button. While the indicator lights up for about three
seconds, select a DSP program using the number buttons (1 to
8). No DSP program can be selected after the indicator goes off.
6 PRESET (+/–)
Press these buttons to select the preset station number.
7 VOLUME ( )
Press these buttons to adjust the volume level.
8 MUTE
Press this button to mute the sound. To cancel mute, press this
button once more, or press the operation buttons of this unit.
9 SLEEP
Press this button to set the SLEEP timer.
q (LEFT)
This button is used to adjust the settings of the SET MENU
mode and the TIME/LEVEL mode.
r TIME/LEVEL
Press this button to select the item in the TIME/LEVEL mode.
t STANDBY
Press this button to turn this unit into Standby mode.
y TEST
Press this button to output a test tone for adjusting the output
level of the speakers.
u EFCT (EFFECT) ON/OFF
Press this button to switch the DSP program on or off.
p (BACK)
Press this button to go back one selection in the SET MENU
mode and TIME/LEVEL mode.
a (RIGHT)
This button is used to adjust the settings of the SET MENU
mode and the TIME/LEVEL mode.
s (NEXT)
Press this button to advance one selection in the SET MENU
mode and TIME/LEVEL mode.
f SET MENU
Press this button to select functions in the SET MENU mode.
2 DSP program
Press these buttons to select the DSP program (1 to 8). When
you select the input source, set the SELECTOR DIAL to the
AMP/TUN position.
Note: The function of all buttons other than DSP program is
the same as with the AMP/TUN position.
t
1
2
3
7
5
4
8
9
u
y
f
s
a
p
r
q
6
2
■ DSP
Indicator:
Flashes in red
when the button
is pressed.
Indicator window:
Displays the names of
components which
can be controlled.
SELECTOR DIAL:
Selects the
component to be
controlled.
Faintly colored buttons do not function.
(TV VOLUME)
(TV POWER)
01RX-V595-e/f6 6/23/99, 4:11 PM46