Filter
Top Products
16
CONNECTING TO DIGITAL (COAXIAL AND/OR OPTICAL) TERMINALS
If your DVD (LD) player, TV/DBS tuner, etc. are equipped with
coaxial or optical digital audio signal output terminals, they can
be connected to this unit’s COAXIAL and/or OPTICAL digital
signal input terminals.
To make a connection between optical digital audio signal
terminals, remove the cover from each terminal, and then
connect them by using a commercially available optical fiber
cable that conforms to EIAJ standards. Other cables might not
function correctly.
Even if you connect an audio/video unit to the COAXIAL (or
OPTICAL) terminal of this unit, you must keep the unit con-
nected with the same named analog audio signal terminals of
this unit, because digital signal cannot be recorded by a tape
deck or VCR connected to this unit. You can switch the
selection of input signals between “digital” and “analog” easily.
(See page 29 for details.)
Notes
• When connecting an audio/video unit to both of the digital
and analog terminals of this unit, make sure to connect to
both terminals of the same name.
• Be sure to attach the covers when the OPTICAL terminals
are not being used, in order to protect the terminals from
dust.
• The input signal from the DVD/LD input terminals is selected
in the following order of priority.
(input mode: AUTO position)
1 COAXIAL terminal
2 OPTICAL terminal
3 ANALOG terminal
• All digital audio signal input terminals are applicable to the
sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.
DVD or LD player TV/DBS tuner
(U.S.A. model)
75
Ω
UNBAL.
EXTERNAL DECODER INPUT
DIGITAL SIGNAL
MAIN CENTER
SURROUND
COAXIAL
DVD/LD
OPTICAL
DVD/LD TV/DBS
SUB WOOFER
GND
MONITOR
OUT
DVD/LD TV/DBS
VIDEO SIGNAL
AUDIO SIGNAL OUTPUT
IN OUT
VCR
DVD/LD
SUB
WOOFER
TAPE/MD
IN
(PLAY)
OUT
(REC)
CDPHONO TV/DBS
IN OUT
VCR
R
L
R
L
R
L
FM
ANT
AM
ANT
GND
01RX-V595-e/f2 6/23/99, 4:09 PM16