Filter
Top Products
70
REMOTE CONTROLLER
This is a learning remote controller. The shaded keys in the illustration shown below can be programmed to “learn” control
functions from other remote controllers. This unit can be used in place of other remote controllers by learning their functions. It will
be much convenient for you to operate various audio and video components.
Some of the “learning-capable” keys are originally empty and others have already been preset with functions to control this unit and
other Yamaha components. You can store new functions to them (in place of preset functions) as desired.
* See page 76 for the learning method.
* See page 78 for clearing a learned function (or all learned functions).
Note
If the memory capacity of the remote controller becomes full, no further learning is possible even if some learning-capable keys are
not occupied with new functions. If, for example, you store Yamaha codes only into this remote controller, up to about 50 functions
can be stored. Therefore, we recommend that only required functions be stored.
Keys which can have three functions (1, 2, 3, 4)
In the “Learning-capable” keys, the keys numbered 1–4 in the
illustration on the left can have three functions. This is because they
have three memory areas (A, B and C). (One function per area.)
You can store new functions into the area B and C, and use three
functions on a key by switching the memory areas with the A/B/C
switch. (Area A cannot learn a new function.)
To use these keys:
1. Before using a key, select area A, B or C of the key on which the
function you want to use is stored by using the A/B/C switch.
2. Press the key.
The default settings of these keys are as follows.
Preset with
functions for
controlling a
Yamaha tape
deck.
Preset with
functions for
controlling a
Yamaha CD
player.
(STOP is empty.)
Preset with
functions for
controlling the
built-in tuner.
Preset as the DSP
program selector
keys.
Empty
Preset with functions
for controlling a
Yamaha DVD player
(except the models
DVD-1000 and
DVD-S700).
Empty
Preset as the DSP
program selector
keys.
Preset with
functions for
controlling a
Yamaha MD
recorder (except
the model MDX-9).
(A/B, DIR A and B
are empty.)
Preset with
functions for
controlling a
Yamaha LD player.
(DISC is empty.)
Empty
Preset as the DSP
program selector
keys.
4
1
2
3
The position of A/B/C switch
A
B
EFFECT
ON/OFF
C
TRANSMIT
/LEARN
LEARNCLEAR MACRO
PRESET
A/B/C/D/E
CHURCH
123
CLUB
JAZZ
STADIUM
THEATER 1
MOVIE
THEATER 2
MOVIE
VIDEO
CONCERT
THEATER
TV
CONCERT
ROCK
TAINMENT
ENTER-
456
HALL 1 HALL 2
789
PARAMETER
SET MENU
SLEEP
ON SCREEN
LEVEL
TEST
MASTER VOLUME
TV
VCR
STANDBY
SYSTEM
POWER ON
10 11
MUTE
REMOTE CONTROL
TRANSMITTER
/
DTS
SURROUND
12
TAPE/MD
CD
TUNER
VCR 1
VCR 2
DVD/LD
V-AUX
EXT. DEC.
PHONO
TV/DBS
DIR
STOP DISC
REC/PAUSE
A/B
BA
1
3
2
4
1
2
A/B/C switch
Cover is open.
(
*
1): These buttons are used for learning a new function
or clearing a learned function (or all learned
functions). For details, refer to pages 76 to 78 .
(
*
1)
Using the “learning-capable” keys (Cover is open)
A
TAPE/MD
CD
TUNER
B
VCR 1
DVD/LD
TV/DBS
C
VCR 2
V-AUX