Filter
Top Products
46
1
2 Press and hold the MEMORY button for more than 3
seconds
After approx. 5 seconds, the automatic preset tuning begins
from the currently displayed frequency toward higher
frequencies. Received stations are programmed to A-1,
A-2 ... A-8 sequentially.
* If more than 8 stations are received, they are also
programmed to the preset station numbers on other groups
(B, C, D and E) in that order.
If you want to store the first station received by the
automatic preset tuning to the desired preset station
number;
If, for example, you want to store the first received station to
C-5, select “C-5” by using the A/B/C/D/E (
1) button and the
PRESET STATIONS/TUNING (
2) button after the MEMORY
button is pressed in step 2. (These operations must be done
before the automatic preset tuning begins.)
The first received station is stored to C-5, and next stations to
C-6, C-7 ... sequentially. If stations are stored up to E-8, the
automatic preset tuning will be finished automatically.
If you want to make the automatic preset tuning
toward lower frequencies;
In step 2, after the MEMORY button is pressed (and then the
desired preset station number is selected), press the
PRESET/TUNING (
3) button to make “ : ” go off from the
display. Then press the left side of the PRESET STATIONS/
TUNING (
2) button. (These operations must be done before
the automatic preset tuning begins.)
The automatic preset tuning begins toward lower frequencies.
Ⅵ Automatic preset tuning
You can make use of an automatic preset tuning function for FM stations. With this function, this unit performs automatic tuning and
stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual
preset tuning method on page 44.
To store stations
FM/AM
NATURAL SOUND AV RECEIVER RX V2095
CINEMA DSP
7ch
VOLUME
INPUT SELECTOR
INPUT MODE
l6
20
28
40
60
l2
8
4
2
0
–dB
PHONES
BASS
EXTENSION
BASS TREBLE BALANCE
TONE
BYPASS
VCR 2
VIDEO AUX
REC OUT/ZONE 2
VCR 1
TV/DBS
PHONO
TUNER
CD
DVD/LD
SOURCE/REMOTE
TAPE/MD
VIDEO AUX
EFFECT
A/B/C/D/EA
SPEAKERS
B
PROGRAM
PRESET STATIONS
TUNING
EXT. DECODER
STANDBY/ON
55
4
3
2
l
0
l
2
3
4
LR
55
4
3
2
l
0
l
2
3
4
55
4
3
2
l
0
l
2
3
4
EDIT
FM/AM
MEMORY
PRESET/TUNING TUNING MODE
MAN’L/AUTO FMAUTO/MAN’L MONO
1
➂
2
BASIC OPERATION
Flashes.
MEMORY
MAN’L/AUTO FM
SPEAKERS
A
TAPE/MD
CD
TUNER
PHONO
DVD/LD
TV/DBS
VCR 1
VCR 2
V-AUX
MEMORY
STEREO
AUTO
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 45.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on page 45.
A recalled station is shown by the frequency on the display.
Notes
●
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 44.
●
If the number of received stations is not enough to be stored
up to E-8, the search will be finished automatically after
searching all frequencies.
●
With this function, only FM stations with sufficient signal
strength are stored automatically. If the station you want to
program is weak in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 44.
➁➀