Filter
Top Products
E-23
ADVANCED OPERATION
English
ADVANCED
OPERATION
Adjusting DSP sound field parameters
How to adjust parameters
1. Select the program whose parameters you wish to
adjust. (Parameter adjustment is effective for the
currently selected program only.)
2. Select the DSP-EDIT tab at the bottom of the Main
Panel. The basic parameter screen appears.
3. This screen allows you to adjust the basic parameters.
Open the “ADVANCED SETTING” panel for adjusting
the detailed parameters.
Basic parameters
Effect Level Selects the level of effect sound from the three levels.
Room Size Selects the apparent size of the listening space from the three levels.
Seat Position Selects the simulated listening position from the three positions.
Detailed parameters
The following parameters are available on the “ADVANCED SETTING” panel. Depending on the selected program and input signals,
not all of the parameters can be adjusted.
Effect Trim Makes fine adjustment of the level of the overall effect sound.
Rear Effect Trim Makes fine adjustment of the level of the rear effect sound.
Initial Delay Adjusts the apparent distance from the sound source to the walls.
Room Size Adjusts the apparent size of the listening space.
Liveness Adjusts the apparent reflectivity of the walls.
Surround Delay Adjusts the delay time of the surround sound field.
S. Initial Delay (Surround Initial Delay) Adjusts the initial delay time of the surround sound field.
(This parameter can be
adjusted only when the “Speaker Settings” of this unit has been set to two front and two
surround channels or more, and Dolby Digital- or DTS-encoded signals are inputted.)
S. Room Size (Surround Room Size) Adjusts the apparent size of the surround sound field.
Reverb Time Adjusts the duration of reverberations.
Reverb Level Adjusts the level of reverberations.
Reverb Delay Adjusts the delay time of reverberations.
Restores all parameters to their
default values.
Restores the basic parameter screen.
Select a parameter by clicking its name, and adjust the
parameter by sliding the indicator at the bottom of the panel.
You can adjust various parameters of the DSP sound field
programs.
The default parameters of the sound field programs provide
great sound, but it is also possible to fine-tune the
parameters to suit the acoustics of the room, individual
preferences, and program source. Parameter adjustment
is required for each selected sound field program.
Basic parameters
Opens the “ADVANCED
SETTING” panel.