Filter
Top Products
E-12
BASIC OPERATION
First turn on the external unit to be used, and then this
unit.
1
Select the source to be recorded by using the
input selector keys.
2
Start recording on a recording unit (an MD
recorder, tape deck, etc.).
3
Start playing the input source .
Ⅵ Playing the recorded result via this unit
Select the input signals sent from the recording unit with
the input selector keys.
Notes
● If input signals received at any digital input terminal other
than the USB terminal is outputted at the digital output
terminal, the sampling frequency for the output signals is the
same as that for input signals.
● The sampling frequency for digital signals converted from
analog signals on this unit is 44.1 kHz or 48 kHz.
● When digital input signals are outputted at the digital output
terminal, track information (CD-text data, automatic track
renewal when recording is made on an MD, etc.) is invalid if
any sound field program (including the graphic equalizer
effect) is used.
● Both REC OUT and OPT OUT terminals on the rear of this
unit output the same constituents of signals as outputted from
the left and right front speakers.
Recording
Input sources (e.g., a computer or CD player) selected on
this unit can be recorded by an MD recorder, tape deck,
etc. connected to this unit. Also, input signals can be fed to
your computer via the USB connection.
* When a source is recorded using a sound field
program, sound field effects are recorded with the
source.
Ⅵ Recording on an external recording unit
PC
AUX1
AUX2
TUNER
DSP P-SET
VOL
VIRTUAL
5.I
CH
DIGITAL
PROLOGIC FM AMST
USB PCM D.
DSP
PC
AUX1
AUX2
TUNER
JAZZ CHURCHHALL
B CA
MOVIE LIVE
PRESET MANUALMEMORY
GAME
TEST
ON
/
OFF
/DTS
SURROUND
VOLUMEMUTE
POWER
1
1
TUNER
PC
AUX1
AUX2
TUNER
PC
AUX1
AUX2
Front panel
or
Remote control
Notes
● Just after selecting a program, the program name scrolls from
right to left on the display, and then its short-version name
lights up.
● No sound field program can be used when receiving signals
with a 96 kHz sampling frequency.
ON
/
OFF
DSP
Front panel
or
Remote control
Ⅵ To turn off the sound field effect
Press the DSP key on the front panel or the ON/OFF key on
the remote control. “THROUGH” appears on the display.
Note
When the sound field effect is off, sound is reproduced in normal
stereo.
Ⅵ Adjusting DSP sound field parameters
The surround effect of each program or the Virtual 3D effect can
be adjusted to the desired taste by using the Application
Software. Refer to the online help of the Application Software
for details.