Filter
Top Products
MANUAL SETUP
73
ADVANCED
OPERATION
You can use the following parameters in SET MENU to manually adjust a variety of system settings and customize the
way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your
listening environment.
y
• You can run MANUAL SETUP using the system menu that appears in the OSD or in the front panel display. This manual uses the
OSD illustrations to explain the MANUAL SETUP procedure.
1 BASIC MENU
Use to manually adjust basic system parameters.
2 SOUND MENU
Use to manually adjust speaker settings or compensate for video signal processing delays when using LCD monitors or
projectors. Most of the SOUND MENU parameters are set automatically when you run AUTO SETUP (see page 30).
y
Most of the parameters described in SOUND MENU are set automatically when you run AUTO SETUP (see page 30). You can use
SOUND MENU to make further adjustments, but we recommend running AUTO SETUP first.
3 INPUT MENU
Use to manually reassign digital input and output, select the input mode, rename your input, or specify external input
settings.
MANUAL SETUP
Item Features Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output and the cross over
frequency.
76
B)SP LEVEL Adjusts the output level of each speaker.
78
C)SP DISTANCE Adjusts the delay time of each speaker.
78
D)THX SET Adjusts the THX settings.
79
E)TEST TONE
Turns the test tone output on or off for the SPEAKER SET, SP LEVEL and
SP DISTANCE settings.
79
Item Features Page
A)EQUALIZER Adjusts the tonal quality of each speaker.
79
B)LFE LEVEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
80
C)DYNAMIC RANGE Adjusts the dynamic range of Dolby Digital or DTS signals.
80
D)AUDIO SET Adjusts the overall audio settings for this unit.
80
E)HDMI SET Adjusts the HDMI support audio.
80
Item Features Page
A)I/O ASSIGNMENT Assigns jacks according to the component to be used.
81
B)INPUT RENAME Changes the name of the input.
82
C)VOLUME TRIM Adjusts the output volume of each jack.
82
D)DECODER MODE
Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear panel of
this unit.
82
E)MULTI CH SET
Adjusts the direction of the signals input into the center, subwoofer and surround channels when a
source component is connected to the MULTI CH INPUT jacks.
82