Yamaha HTR-5850 Stereo System User Manual


 
SET MENU
56
You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
BASIC SETUP
Use to quickly setup basic system parameters (see page 23).
MANUAL SETUP
Use to adjust speaker and system settings manually.
1 SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using LCD monitors or projectors.
y
Most of the parameters described in SOUND MENU are set automatically when you perform “BASIC SETUP” (see page 23). You can
use SOUND MENU to make further adjustmen
ts.
2 INPUT MENU
Use to reassign digital input/outputs and select the input mode.
3 OPTION MENU
Use to adjust the optional system parameters.
SET MENU
Item Features Page
A)SPEAKER SET
Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over
frequency.
58
B)SP LEVEL
Adjusts the output level of each speaker.
59
C)SP DISTANCE
Adjusts the delay time of each speaker.
59
D)CENTER GEQ
Adjusts the tonal quality of the center speaker. 59
E)LFE LEVEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
59
F)D.RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals.
60
G)AUDIO SET
Customizes the muting level and audio delay. 60
Item Features Page
A)I/O ASSIGN
Assigns jacks according to the component to be used.
60
B)INPUT MODE
Selects the initial input mode of the source.
61
C)INPUT RENAME
Changes the name of the inputs. 61
Item Features Page
A)DISPLAY SET
Adjusts the brightness of the display and converts video signals (HTR-5850 only).
61
B)MEMORY GUARD
Locks sound field program parameters and other SET MENU settings.
61
C)PARAM. INI
Initializes the parameters of a group of sound field programs. 61
D)MULTI ZONE
Specifies the location of the speakers connected to the SPEAKERS B terminals.
62
E)XM RADIO SET
Displays the current reception level for the XM Connect and Play digital antenna.
62
01EN_HTR-5850_U.book Page 56 Tuesday, January 18, 2005 7:25 PM