Filter
Top Products
22
Disc play
If the power of both units is switched on, you can begin relay play. You can set play mode (ALL, GROUP, +1, PROGRAM) on each
unit separately and enjoy any combination play using both units. First, the main (ACTIVE) unit starts play in the selected play mode,
and Relay play will take effect according to the following chart (at which time the main unit will become “INACTIVE” and the second
unit will become “ACTIVE”) :
Playing mode of
ACTIVE unit
ALL
GROUP
+1
PROGRAM
ACTIVE unit and INACTIVE unit will
switch when:
all discs finish playing.
all discs of the group finish playing.
the current disc finishes playing.
all steps you programmed finish playing.
• The ACTIVE unit plays the BEST FILING program automatically if the current disc has BEST FILING data and “FILE” appears in
the display.
• The remote control transmitter controls the ACTIVE unit only. To operate the INACTIVE unit, you must use the controls on the front
panel.
• To switch the ACTIVE unit and INACTIVE unit manually, press ACTIVE on the remote control transmitter.
To exit relay play mode
Turn either unit off. The other unit can still be used.
When random sequence play mode of the ACTIVE unit is off
Playing mode of
ACTIVE unit
ALL
GROUP
+1
ACTIVE unit and INACTIVE unit will
switch when:
one track finishes playing.
(In these cases, the INACTIVE unit
enters random sequence play mode
automatically.)
When random sequence play mode of the ACTIVE unit is on
TIMER PLAY
You can start play in any mode at any specified time by connecting a timer (sold separately). Refer also to the instructions for the
timer.
1. Select the desired play mode (ALL, GROUP, +1, or PROGRAM).
2. Press STANDBY/ON to turn the unit off.
3. Press STANDBY/ON while pressing PLAY on the front panel.
Shortly thereafter, “TIMER P. ON” appears in the display and the timer play function is on.
(When the timer play function is already on, in which case, “TIMER P. OFF” appears in the display and timer play function is off.
In this case, repeat the procedure in steps 2 and 3 to set the timer play function to on.)
4. Set the timer to the desired time.
When the set time comes, the unit turns on and starts play.
Example: When you set the main unit to GROUP play
mode and the second unit to +1 play mode.
After all discs of the group finish playing
• The main unit starts playing in group play
mode.
• The second unit becomes the ACTIVE unit and
starts playing in +1 play mode
After the current disc finishes playing
• The main unit becomes the ACTIVE unit again
and starts playing in group play mode
INACTIVE unit
ACTIVE unit
ACTIVE unit INACTIVE unit
ACTIVE unit
Relay play repeats until it is canceled
MAIN
2nd
MAIN
2nd
MAIN
2nd
INACTIVE unit
• When either unit is set to program play mode, the relay play
function in random sequence play does not work.