Open as PDF
1 Stop the unit.
2 Select the “1DISC” disc play mode.
3 Select the disc.
The peak level search is performed on the disc.
Next, the part where the source level peaks is
repeatedly played. Adjust the recording level on the
tape deck listening to this repeat play.
To cancel this function
Press the STOP button.
AUTOMATIC SEARCHING FOR THE PEAK LEVEL ON A DISC
This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly.
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
8 9 10
8 9 10
Even if the peak level search is performed twice or more on
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
In the program play mode, this feature will function among
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.
To search for the peak level through all discs on the disc
tray, in step 2, select the “5DISCS” disc play mode.
4 5 6 7 8 9 0
2 3 4
(On the front panel)
87 9 0
54 6 +I0
REPEAT RANDOMMODEDISC SCAN
STOP PAUSE PLAY
for CDC-675 only