Filter
Top Products
77
English
REMOTE CONTROL OUT
AUDIO SIGNAL ZONE 2 OUT
VIDEO SIGNAL ZONE 2 OUT
REMOTE CONTROL IN
CUSTOM INSTALLATION GUIDE
You can make up a dual-room audio/video system with this unit. In this system, you can make this unit send audio and video
signals to the main room’s equipment (speakers and TV monitor) and the second room’s equipment (amplifier and TV monitor)
respectively. For example, you can enjoy listening to a CD source in the main room while another person is enjoying watching an
LD source in the second room.
Ⅵ Connections
The following optional products are required to use the dual-
room function.
1 An infrared emitter in the main room
This emitter emits the infrared signals transmitted by the
remote controller in the second room to the other
components in the main room (for example, CD player or
LD player).
2 An amplifier, TV monitor and speakers for the second room
3 A remote controller used in the second room
4 An infrared signal receiver for the second room
Connect the ZONE 2 OUT audio output terminals of this unit to
the MAIN IN terminals (or equivalents) of the amplifier in the
second room, and connect the ZONE 2 OUT video output
terminal of this unit to the video signal input terminal of the TV
monitor in the second room.
Up to 6 units can be connected in this
connecting way.
This unit
3 Remote controller
LD player etc.
This unit
Main Room
Amplifier
TV monitor
4 Infrared signal receiver
Second Room
1 Infrared emitter
2
OUTINOUTOUT IN
Example of system configuration and connections
(
*
1)
(*1): Some Yamaha models can be connected to this unit’s
REMOTE CONTROL OUT terminals. If you connect these
units in series, the use of an infrared emitter may not be
necessary.
Note
Since there are so many ways to connect and use this unit in a
dual-room system, we recommend that you consult with a
custom installation specialist for connections which will best
meet your requirements.