Filter
Top Products
64
SOUND FIELD PROGRAM PARAMETER EDITING
■ RC.INIT.DLY (rear center initial delay)
Function: This parameter adjusts the delay between the direct sound and the first reflection in the rear center
sound field.
Control range: 1 – 49 msec
■ RC.ROOM SIZE (rear center room size)
Function: This parameter adjusts the apparent size of the rear center sound field.
Control range: 0.1 – 2.0
■ RC.LIVENESS (rear center liveness)
Function: This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
Control range: 0 – 10
■ REV.TIME (reverberation time)
Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to
decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an
extremely wide range.
Control range: 1.0 – 5.0 sec
Description: Set a longer reverberation time for “dead” sources and listening room environments and a shorter time
for “live” sources and listening room environments.
60 dB
REV. TIME REV. TIME REV. TIME
60 dB 60 dB
Level
Time
Level
Time
Sound source
Early reflections
Level
Time
Short reverberations
Long reverberations
Small value = 1.0 s
Large value = 5.0 s
Reverberations
Reverberations
Reverberations
Sound source