Filter
Top Products
41
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SET MENU
6 INPUT RENAME
Use this feature to change the name of the input which
appears on the OSD or the front panel display.
1 Press an input selector button (or use INPUT
l / h) to select the input you want to
change the name of.
2 Press j / i to place the _ (under-bar) under
the space or the character you want to edit.
3 Press u/d to select the character you want
to use and j / i to move to the next one.
• Press d to change the character in the following
order, or press u to go in the reverse order.
A to Z, a space, 0 to 9, a space, a to z, a space, #,
*, +, and so on.
• Follow the foregoing procedure to rename other
inputs.
Note
• You can use up to 8 characters to rename the inputs.
4 Press i repeatedly to exit from INPUT
RENAME.
7 I/O ASSIGNMENT
Use this feature to designate the input for the
COMPONENT jacks (A and B) and the DIGITAL
INPUT/OUTPUT jacks (1 to 8) to any sources you
want.
■ 7A [A] [B] (for the COMPONENT
VIDEO jacks)
Initial settings: [A] DVD
[B] D-TV/LD
■ 7B (1) (2) (for the OPTICAL
OUTPUT jacks)
Initial settings: (1) MD/TAPE
(2) CD-R
■ 7C (3) to (6) (for the OPTICAL
INPUT jacks)
Initial settings: (3) CD
(4) CD-R
(5) DVD
(6) D-TV/LD
■ 7D (7) (8) (for the COAXIAL INPUT
jacks)
Initial settings: (7) CD
(8) CBL/SAT
Note
• You cannot select an item more than once for the same type of
jack.
8 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 26 for details about the input
mode).
Choices: AUTO, LAST
Initial setting: AUTO
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for that source.
9 PARAM. INI (parameter
initialization)
Use this feature to initialize the parameters for each DSP
program within a DSP program group. When you
initialize a DSP program group, all of the parameter
values within that group revert to their initial settings.
1 Press DSP.
2 Press the numeric button (DSP program
group button) on the remote control for the
DSP program you want to initialize.
All of the DSP programs within the selected program
group are initialized.
y
• The asterisk mark (*) next to a DSP program group number
indicates that you have changed the parameter values in one or
more DSP programs within that group.
Notes
• You cannot initialize the individual DSP programs within a
group separately.
• The parameter values of the DSP programs do not change if
you initialize a program group that does not have the asterisk
mark (*).
• When “15 MEMORY GUARD” is set to ON (see page 43),
you cannot initialize any program groups.
• Once you initialize a DSP program group, you cannot
automatically revert to the previous parameter settings.