Filter
Top Products
72
SET MENU
16 ZONE2 SET
Use this feature to make a setting for audio output to
ZONE 2 OUT.
■ OUTPUT VOL (output volume)
This item changes the volume control setting for audio
output to ZONE 2 OUT.
Choices: VAR., FIX
Initial setting: VAR.
VAR.
To adjust the ZONE 2 OUT volume with VOLUME +/–
on the remote control.
FIX
To fix the ZONE 2 OUT volume to the volume level of
this unit.
■ SP OUT
Use this feature to switch assignment of the front effect
speakers’ output destination.
Choices: OFF, ON
Initial setting: OFF
ON
To assign the amplifier outputs for the front effect channel
to the ZONE 2 OUT SPEAKERS terminals.
OFF
To assign the amplifier outputs for the front effect channel
to FRONT EFFECT speaker terminals as normal
operation.
y
• When SP OUT is set to ON, 1F FRONT EFCT SP will be
automatically set to NONE. When it is switched to OFF, 1F
FRONT EFCT SP will be set to the previous setting.
Note
• When SP OUT is set to ON, it is not necessary to connect
ZONE 2 OUT jacks.
16 ZONE2 SET
SP OUT…………………OFF
≥ OUTPUT VOL……VAR.
0109V3300_60-74_EN(UA) 02.7.24, 6:07 PM72