Filter
Top Products
26
3 Set the BASS and TREBLE controls on the
front panel to the center position and turn off
BASS EXTENSION and PROCESSOR
DIRECT by pressing the buttons.
“BASS EXT. OFF” and “P. DIRECT OFF” appear
on the front panel display.
4 Set PARAMETER/SET
MENU on the remote
control to PARAMETER.
TEST DOLBY SUR.
Select “TEST DOLBY SUR.” to match the output levels
of the center, rear center and left and right rear speakers
to the left and right main speakers.
1 Press TEST to output the
test tone.
2 Adjust the volume so you can hear the test
tone.
This section explains how to adjust the speaker output
levels by using the test tone generator. The “TEST
DOLBY SUR.” is for balancing the output levels of the
six speakers required for surround sound systems. The
“TEST DSP” is for balancing the front effect speakers
with the main speakers for the DSP sound field programs.
When this adjustment is made, the output level heard at
the listening position will be the same from each speaker.
This is important for the best performance of the digital
sound field processor, and various decoders (Dolby
Digital, Dolby Pro Logic, Dolby Pro Logic
, DTS, DTS
ES, and DTS Neo: 6).
The adjustment of each speaker output level should be
made at your listening position with the remote control.
Note
• Since this unit cannot enter the test mode while headphones are
connected to this unit, be sure to unplug the headphones from
the PHONES jack when using the test tone.
Before You Begin
1 Turn on the video monitor connected to this
unit.
2 Press SPEAKERS A or B
to select the main
speakers to be used.
If you are using two sets of the
main speakers, press both A
and B.
TEST
BASS
TREBLE
–
+
–
+
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
A/B/C/D/E
2
31, 4
BASS
EXTENSION
PROCESSOR
DIRECT
SPEAKERS
AB
ADJUSTING THE SPEAKER OUTPUT LEVELS
Set to OFF.
BASS
VOLUME
VIDEO AUX
SILENT
PROGRAM
STEREO
REC OUT
/ZONE 2
SPEAKERS
INPUT
MODE
BASS
EXTENSION
PROCESSOR
DIRECT
PRESET
/
TUNING
PHONES
EFFECT
SOURCE
/REMOTE
MD/TAPE
CD–R
TUNER
CD
PHONO
DVD
D–TV/LD
CBL/SAT
VCR 1
V–AUX
VCR2
/DVR
A/B/C/D/E
S VIDEO
MEMORY
FM/AM
EDIT
PRESET
/TUNING
MAN'L/AUTO FMAUTO/MAN'L MONO
TUNING
MODE
VIDEO AUDIO OPTICALLR
STANDBY
/
ON
NATURAL SOUND AV RECEIVER RX-V3300
TREBLE
–
+
–
+
6CH
INPUT
AB
DIGITAL
2
33
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
A/B/C/D/E
4
PARAMETER
SET MENU
VOLUME
0104V3300_24-28_EN(UA) 02.7.24, 6:05 PM26